工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。

工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

軟管泵具有輸送強研磨性介質的能力。它無閥、無密封，同介質接觸的 部件是橡膠軟管的內腔，壓縮軟管的轉子完全獨立于介質之外。

The hose pump has the ability to transport strong abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner cavity of the rubber hose. The rotor of the compression hose is completely independent of the medium.