電工鋼硅鋼片從2008年5月15日，寶鋼 卷合格取向電工鋼成功下線以來，寶鋼取向電工鋼品種迅速拓展至普通型、青海當?shù)馗叽鸥行秃图毣女牳叽鸥行腿箢悺１臼謨跃C合介紹了寶鋼取向電工鋼的牌號、青海當?shù)仄贩N、青海當?shù)匾?guī)格、青海當?shù)貞梅秶?、青海當?shù)仉姶判阅?、青海當?shù)亓W性能、青海當?shù)爻叽绨逍喂?、青海當?shù)叵嚓P的使用技術及廣泛的應用業績，使用戶對寶鋼取向電工鋼產品能進一步了解，進而充分利用寶鋼電工鋼產品特性，生產出更加優良的下游產品。寶鋼可以提供從變壓器鐵心設計材料選擇到變壓器制造，包括：核心設計中的材料選擇，以控制性能和成本；從成本和性能角度優化鋼材和結構；為核心制造提供技術支持，以確保 性能；新產品和新技術，提高變壓器產品的競爭力。工作經驗：40多年前從事晶粒取向電工鋼，具有完整的研發、青海當?shù)刂圃旌蛻媚芰Ξa(chǎn)品：產品種類繁多，包括對流、青海當?shù)馗叽艑?、青海當?shù)禺牸毣?、青海當?shù)氐痛胖律炜s和無鉻酸鹽涂層晶粒取向電工鋼等級：鐵損P1.7/50低于0.55W/kg的 級能力：中國有史以來 家開發出具有制造100％優質晶粒取向電工鋼。晶粒取向電工鋼產量居世界 。寶鋼不斷更新和改進性能變壓器用產品數據庫，為自定義ers提供一系列來自機械性能的全套數據和基本磁性能下的特殊性質工作條件根據不同的要求，寶鋼可以為客戶提供性能數據原始曲線和其他形式的數據。GB20052-2020新能源效率一級產品S15-M-200/10、青海當?shù)豐15-M-400/10變壓器成功投產用高等級GO電工鋼B18R055制造，B20R060，其空載損耗和負載損耗均滿足新的1級變壓器的要求。寶鋼高級晶粒取向電工鋼B27R090成功應用于雙百萬變壓器的制造ODFPS-1000000/1000用于超高壓交流輸電項目包括空載損耗在內的所有變壓器特性，空載電流和噪聲符合設計要求。寶鋼優質晶粒取向硅鋼B23R075已成功應用于轉爐生產昌吉-古泉±1100kV特高壓直流輸電變壓器 電網項目?？蛰d損耗、青海當?shù)乜蛰d電流和噪音變壓器的各項性能完全符合技術要求。 無機涂層，S/T2 涂層為磷酸鹽和二氧化硅為主的無機成分混合物。該涂層具有較高的耐熱性，在干的氮氣或者干的氮氫混合保護氣氛中可以承受 850℃應力退火。對絕緣油、青海當?shù)厍迤?、青海當?shù)貦C械油、青海當?shù)刂评錃怏w等有高耐腐性。 無 Cr 環保涂層,H,涂層成分中不含 Cr 元素

電工鋼硅鋼片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Specific total loss (iron loss) is the total power consumed per unit mass of material when the magnetic polarization waveform remains sinusoidal, with a specific peak and frequency. The specific total loss is represented by the symbol P (Jm/f), in W/kg. Example: P1.5/50 represents the specific total loss at a maximum magnetic polarization intensity of 1.5T and a frequency of 50Hz. 3.2 Magnetic Polarization Q/BQB 480-20212 Magnetic polarization intensity refers to the peak magnetic polarization intensity of a specific magnetic field intensity when a sample is subjected to alternating magnetization. Its symbol is J (H), and the unit is T (Tesla). Example: J5000 represents the peak magnetic polarization intensity corresponding to a magnetic field intensity peak of 5000A/m. The material grades in this document are classified based on the nominal maximum specific total loss P1.5/50 (W/kg) at a magnetic polarization strength of 1.5T and a frequency of 50Hz, as well as the nominal thickness of the material. They are further divided into three categories based on product characteristics: ordinary type, stress relief annealing type, and high-efficiency type. Example 1: B35A210 represents a common non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 2.10W/kg； Example 2: B35AR300 represents a stress relieved annealed non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 3.00W/kg； Example 3: B35AH230 represents an efficient non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. Example 4: 35WW210 represents a normal type WW non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.10W/kg. Example 5: 35WH230 represents an efficient WH non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. The classification and code of insulation coatings shall comply with the provisions of Table 2. Table 2 Classification and Code of Insulation Coatings Type Code Characteristics of Insulation Coatings Semi organic Thin Coating A Improves Punching Performance and Has Good Weldability Semi organic Thick Coating H has Good Punching Performance and High Interlayer Resistance Semi organic Chromium Free Thin Coating K does not contain chromium and has good weldability Semi organic Chromium Free Thick Coating M does not contain chromium and has good insulation performance Semi organic Chromium Free Extreme Thick Coating J does not contain chromium and has excellent insulation performance Semi organic Chromium Free Ultra Thick Coating L does not contain chromium and has extremely high insulation performance Self adhesive Coating

電工鋼硅鋼片硅鋼是一種硅鐵合金。用硅鋼軋制的片材是電工領域中應用廣的軟磁材料，因而硅鋼片又稱電工鋼片。硅鋼片廣泛用于電動機、發電機、變壓器、扼流圈、電磁機構、繼電器及測量儀表中電機工業大量使用厚度為0.35～0.50mm的硅鋼片,用于：中型旋轉機，壓縮電機，通用馬達，小型精密電機，電動汽車，壓縮機，通用電機，電源變壓器，精密變壓器，節能電機，焊機變壓器，穩壓器，磁性密封器，加速器用電磁鐵，汽車電機等；在電信高頻技術中常用0.05~0.20mm的薄帶鋼片,以便更有效地降低渦流損耗。熱軋硅鋼片厚度為0.35～0.50mm，密度為7.55～7.70g/cm3,多用于大、中、小型交、直流電動機；冷軋無取向硅鋼片厚度為0.35～0.50mm，密度為7.65～7.75g/cm3，多用于大型交流發電機、電動機，大、中、小型交、直流電動機；冷軋取向硅鋼片厚度為0.23mm 0.27mm 0.3mm 0.35mm，密度為7.65g/cm3,多用于電力變壓器、油浸式變壓器，干式變壓器，電抗器、磁放大器等；冷軋取向薄帶厚度為0.05～0.20mm，多用于無線電高頻變壓器。